Contact Us

Kunshan Chi Jie environmental protection energy saving vehicle development Co., Ltd.

Telephone: 0512-57060888

Fax: 0512-55160855

Mailbox: info@chinachijie.com

Address: Jiangsu city town of Kunshan City Road No. 333 weeks.


News Center

Home > Industry news > Operation procedure of...

Operation procedure of road sweeper

Release Date:2017-07-26 Content Comes From:http://chinachijie.com/en/

More 0

Road sweeper

1 open the control box power supply and point the control valve to the auxiliary valve position

2 start sub machine

3 place the slave clutch control button to the joint position and start the fan work

4 place the dust box control knob pointing to the drop position

5 position the left sweep panel or the right sweep panel knob to the drop position

6 sweep left or right sweep, rotate the control knob to the forward position (Zuo Panshun, hour, right, counter clockwise)

7 position the left water jet, the right water jet, and the rear water jet control knob

8 point the pump control knob to the open position

9 the vehicle travels at the right speed and begins to sweep

1 the car stopped running

2 position the water pump control button, the left water jet control button, the right water jet control button, and the water jet control button pointing to the closed position

3 point the broom control knob to the middle

4 place the sweep control knob toward the position of the lift, then point to the middle position

5 place the dust box control knob pointing up and then pointing to the middle position

6 point the engine clutch control knob to the point, then point to the middle position

7 point the control valve control to the middle position

8 turn off the auxiliary engine

9 turn off the power supply of the control box

  


1 open the power of the control box and point the control valve of the control valve to the position of the main valve

2 start the main engine of the vehicle

3 press the clutch of the car

4 open the oil pump clutch switch on the vehicle (pull out)

5 loosen the vehicle clutch at the right speed

6 place the back door control knob on the control box to the open position and point to the middle position after 5 seconds

7, the car control button pointing to the rise position, according to the tilt angle of the car, you can always point to the middle of the control key, when the car tilted up, stop

8 garbage cleaning

9 after the garbage is finished, the control button is placed at the drop position. When the carriage is fully back, the control button is positioned at the middle position

10 place the back door control key to the closed position and point to the middle position after 10 seconds

11 clean up garbage ends

12 press the clutch of the car

13 turn off the additional oil pump clutch control knob (push inward)

14 loosen the vehicle clutch at the right speed

15 point the control valve of the control box to the middle position

16 turn off the control box power supply

For reference, specific according to the actual operation to judge


Related Tags: 车间清扫车

Relevant Comments:
No Comments
Online Reviews:
Critics:
Contacs:
Marked Contents:
Code  Change